Add IPanelDevice.

E (413) i2c: CONFLICT! driver_ng is not allowed to be used with this old driver

README.md

@@ -3,7 +3,7 @@
 This repository is a collection of useful code snippets and configurations.
 
 ```bash
-github.com/shaunrd0/klips/
+shaunrd0/klips/
 ├── ansible     # Ansible roles, playbooks, and examples
 ├── blockchain  # Blockchain related project templates and examples
 ├── cpp         # C++ programs, datastructures, and other examples
@@ -12,6 +12,6 @@ github.com/shaunrd0/klips/
 ├── figlet      # Figlet fonts I like :)
 ├── javascript  # Javascript projects and examples
 ├── python      # Python scripts and tools I've made
-├── README.md
-└── scripts     # Bash scripts
+├── scripts     # Bash scripts
+└── README.md
 ```

esp/cpp/01_led-button/README.md

@@ -1,5 +1,9 @@
 # 01_led-button
 
+This example is largely adapted from those in [ESP32-basic-starter-kit.pdf](./ESP32-basic-starter-kit.pdf).
+
+The APIs in the original examples paired with this PDF have changed, and I decided to do some different things with the code and/or circuits, but the original code can be [found here](https://www.dropbox.com/scl/fo/6znlij3eb23ih4jxcpv2w/AKvB1t9CCUgoVRVtGen8Yrw?rlkey=z84anl0hs940qf9fpl7l8q8q2&e=1&dl=0).
+
 ![schematic](./schematic.png)
 
 Simple LED controlled by an on-board button.

esp/cpp/02_led-button-web/README.md

@@ -1,5 +1,9 @@
 # 02_led-button-web
 
+This example is largely adapted from those in [ESP32-basic-starter-kit.pdf](./ESP32-basic-starter-kit.pdf).
+
+The APIs in the original examples paired with this PDF have changed, and I decided to do some different things with the code and/or circuits, but the original code can be [found here](https://www.dropbox.com/scl/fo/6znlij3eb23ih4jxcpv2w/AKvB1t9CCUgoVRVtGen8Yrw?rlkey=z84anl0hs940qf9fpl7l8q8q2&e=1&dl=0).
+
 ![schematic](./schematic.png)
 
 This example uses the same schematic as [01_led-button](../01_led-button/).

esp/cpp/03_temp-humidity-web/README.md

@@ -1,5 +1,9 @@
 # 03_temp-humidity-web
 
+This example is largely adapted from those in [ESP32-basic-starter-kit.pdf](./ESP32-basic-starter-kit.pdf).
+
+The APIs in the original examples paired with this PDF have changed, and I decided to do some different things with the code and/or circuits, but the original code can be [found here](https://www.dropbox.com/scl/fo/6znlij3eb23ih4jxcpv2w/AKvB1t9CCUgoVRVtGen8Yrw?rlkey=z84anl0hs940qf9fpl7l8q8q2&e=1&dl=0).
+
 ![schematic](./schematic.png)
 
 Temperature and humidity sensor served on a web page within the local network.

esp/cpp/04_esp-idf-arduino/.gitignore

@@ -1,4 +1,4 @@
 build
 managed_components
-
-
+dependencies.lock
+sdkconfig.old

esp/cpp/04_esp-idf-arduino/README.md

@@ -1,15 +1,24 @@
-# 03_temp-humidity-web
+# 04_esp-idf-arduino
 
-There is no schematic for this example, it simply prints some output to the serial monitor.
+There is no schematic for this example, it simply prints some output to the serial monitor at 115200.
 This is more of a build system example for untethering yourself from the Arduino IDE.
 
 To build this example you can run the following commands.
 
 ```bash
+# See Dependencies section below for instructions.
+source ~/path/to/esp-idf/export.sh
+
 mkdir build
 cd build
 cmake ..
 make -j $(nproc)
+
+# Flash the example to the ESP.
+make flash
+
+# Check the serial monitor for 'Hello world!' output.
+idf.py monitor -b 115200
 ```
 
 To flash to your ESP or access the `idf.py menuconfig` menu from the ESP-IDF you can run the same commands with `make`.
@@ -30,18 +39,43 @@ ninja
 
 ## Dependencies
 
-The [Arduino IDE](https://github.com/arduino/arduino-ide) must be installed.
-
- install [ESP-IDF](https://github.com/espressif/esp-idf?tab=readme-ov-file#setup-build-environment)
+Install the [ESP-IDF](https://github.com/espressif/esp-idf?tab=readme-ov-file#setup-build-environment)
 
 ```bash
-git clone -b v5.3.2 git@github.com:espressif/esp-idf.git
+# https://docs.espressif.com/projects/esp-idf/en/v5.3.2/esp32/get-started/linux-macos-setup.html#for-linux-users
+sudo apt-get install -y git wget flex bison gperf python3 python3-pip python3-venv cmake ninja-build ccache libffi-dev libssl-dev dfu-util libusb-1.0-0
+
+git clone -b v5.3.2 --recursive https://github.com/espressif/esp-idf
 cd esp-idf
 ./install.sh
-
-# You only need to do this if you want to use ESP-IDF's idf.py helper script.
-# This example uses cmake, so it's not required.
 . ./export.sh
 ```
 
+In CLion there is an official [Serial Monitor](https://plugins.jetbrains.com/plugin/8031-serial-port-monitor) plugin, or use ESP-IDF -
 
+```bash
+idf.py monitor -b 115200
+```
+
+## Starting Over
+
+To set up this project from scratch the following commands were used
+
+```bash
+# My example project directory
+cd ~/Code/klips/esp/cpp/04_esp-idf-arduino
+idf.py set-target esp32
+idf.py add-dependency "espressif/arduino-esp32^3.1.1"
+
+# Autostart Arduino for use of `loop()` and `setup()` functions
+# You can also use the esp-idf `app_main()` function if preferred
+# https://docs.espressif.com/projects/arduino-esp32/en/latest/esp-idf_component.html#configuration
+# You can alternatively do this in the GUI tool `idf.py menuconfig`
+echo "CONFIG_AUTOSTART_ARDUINO=y" >> sdkconfig
+sed -i -e 's/CONFIG_FREERTOS_HZ=100/CONFIG_FREERTOS_HZ=1000/' sdkconfig
+
+# Build the project
+idf.py build
+```
+
+To set this project up in CLion, see [JetBrains documentation](https://www.jetbrains.com/help/clion/esp-idf.html#env-vars).

esp/cpp/04_esp-idf-arduino/dependencies.lock

@@ -1,431 +0,0 @@
-dependencies:
-  chmorgan/esp-libhelix-mp3:
-    component_hash: cbb76089dc2c5749f7b470e2e70aedc44c9da519e04eb9a67d4c7ec275229e53
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=4.1.0'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.0.3
-  espressif/arduino-esp32:
-    component_hash: f5fc427eaeb4b84d6b644e3fac1251240a38b8c5e08122f1810a59145f00ccb0
-    dependencies:
-    - name: chmorgan/esp-libhelix-mp3
-      registry_url: https://components.espressif.com
-      require: private
-      version: 1.0.3
-    - name: espressif/cbor
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: target not in [esp32c2, esp32p4]
-      version: 0.6.0~1
-    - name: espressif/esp-dsp
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: target != esp32c2
-      version: ^1.3.4
-    - name: espressif/esp-modbus
-      registry_url: https://components.espressif.com
-      require: private
-      version: ^1.0.15
-    - name: espressif/esp-sr
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: target in [esp32s3]
-      version: ^1.4.2
-    - name: espressif/esp-zboss-lib
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: target not in [esp32c2, esp32p4]
-      version: ==1.6.0
-    - name: espressif/esp-zigbee-lib
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: target not in [esp32c2, esp32p4]
-      version: ==1.6.0
-    - name: espressif/esp_diag_data_store
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: target not in [esp32c2, esp32p4]
-      version: 1.0.1
-    - name: espressif/esp_diagnostics
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: target not in [esp32c2, esp32p4]
-      version: 1.0.2
-    - name: espressif/esp_hosted
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: target == esp32p4
-      version: ^0.0.25
-    - name: espressif/esp_insights
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: target not in [esp32c2, esp32p4]
-      version: 1.0.1
-    - name: espressif/esp_modem
-      registry_url: https://components.espressif.com
-      require: private
-      version: ^1.1.0
-    - name: espressif/esp_rainmaker
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: target not in [esp32c2, esp32p4]
-      version: 1.5.0
-    - name: espressif/esp_wifi_remote
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: target == esp32p4
-      version: ^0.4.1
-    - name: espressif/libsodium
-      registry_url: https://components.espressif.com
-      require: private
-      version: ^1.0.20~1
-    - name: espressif/mdns
-      registry_url: https://components.espressif.com
-      require: private
-      version: ^1.2.3
-    - name: espressif/network_provisioning
-      registry_url: https://components.espressif.com
-      require: private
-      version: 1.0.2
-    - name: espressif/qrcode
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: target not in [esp32c2, esp32p4]
-      version: 0.1.0~2
-    - name: espressif/rmaker_common
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: target not in [esp32c2, esp32p4]
-      version: 1.4.6
-    - name: idf
-      require: private
-      version: '>=5.3,<5.4'
-    - name: joltwallet/littlefs
-      registry_url: https://components.espressif.com
-      require: private
-      version: ^1.10.2
-    source:
-      registry_url: https://components.espressif.com/
-      type: service
-    targets:
-    - esp32
-    - esp32s2
-    - esp32s3
-    - esp32c2
-    - esp32c3
-    - esp32c6
-    - esp32h2
-    - esp32p4
-    version: 3.1.1
-  espressif/cbor:
-    component_hash: 440f4ee4504841cc9b4f3a8ef755776a612ac9dace355514c68b999868f990ff
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=4.3'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 0.6.0~1
-  espressif/esp-dsp:
-    component_hash: fa7fe74305df6da25867437ebcd4213e047cbfc0556cf92067ab657fce537c6e
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=4.2'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.5.2
-  espressif/esp-modbus:
-    component_hash: e42ebfdfc9d8e46821a915b4c1a5c6465c44dbd4e1bca10531e26f4adc7acc42
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=4.3'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.0.17
-  espressif/esp-serial-flasher:
-    component_hash: dcc42a16712a1a636509cf0bf90e14032d7f2141784b533613b267b6aa318d52
-    dependencies: []
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 0.0.11
-  espressif/esp-zboss-lib:
-    component_hash: fad683f7e04366398b61c0eea6e6517d4fe7ec4112407e26743dc80bafc0dcdc
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=5.0'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.6.0
-  espressif/esp-zigbee-lib:
-    component_hash: 0026979f590d7f2b07f433bb0fd031a12b0c2cc0eec8584b59cb6e567d5afd82
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=5.0'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.6.0
-  espressif/esp_diag_data_store:
-    component_hash: 8849195251dbb8a2d7268335277cfa310cef36e4ac1e90cd59ad3be4269a30d7
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=4.1'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.0.1
-  espressif/esp_diagnostics:
-    component_hash: fe19f5ee7f0145f406d36a4d5310e4ae0c6ee1afa47f2681ada8a2ea8582d390
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=4.1'
-    - name: espressif/rmaker_common
-      registry_url: https://components.espressif.com
-      require: private
-      version: ~1.4.0
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.0.2
-  espressif/esp_insights:
-    component_hash: 2472a19de98a8b991baeeac7209765b70ce14ec2b1435dbed3abd020dd0f7227
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=4.1'
-    - name: espressif/cbor
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: idf_version >=5.0
-      version: ~0.6
-    - name: espressif/esp_diag_data_store
-      registry_url: https://components.espressif.com
-      require: private
-      version: ~1.0
-    - name: espressif/esp_diagnostics
-      registry_url: https://components.espressif.com
-      require: private
-      version: ~1.0
-    - name: espressif/rmaker_common
-      registry_url: https://components.espressif.com
-      require: private
-      version: ~1.4.0
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.0.1
-  espressif/esp_modem:
-    component_hash: 681d7c8417ce0f2a11a562c6998b7b379a4847be41d84673c11c0c7a6b00e918
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=4.1'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.3.0
-  espressif/esp_rainmaker:
-    component_hash: f89a4759347f3909417fb33059452f36c86befae9d10bda78b5417b7a5d19d11
-    dependencies:
-    - name: espressif/rmaker_common
-      registry_url: https://components.espressif.com
-      require: private
-      version: ~1.4.6
-    - name: espressif/network_provisioning
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: idf_version >= 5.1
-      version: ~1.0.0
-    - name: espressif/mdns
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: idf_version >=5.0
-      version: ^1.2.0
-    - name: espressif/json_parser
-      registry_url: https://components.espressif.com
-      require: private
-      version: ~1.0.3
-    - name: espressif/json_generator
-      registry_url: https://components.espressif.com
-      require: private
-      version: ~1.1.1
-    - name: espressif/esp_secure_cert_mgr
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: idf_version >=4.3
-      version: ^2.2.1
-    - name: espressif/esp_schedule
-      registry_url: https://components.espressif.com
-      require: private
-      version: ~1.2.0
-    - name: espressif/esp_rcp_update
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: idf_version >= 5.1
-      version: ~1.2.0
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.5.0
-  espressif/esp_rcp_update:
-    component_hash: c10afbd54a17f27eed880e61262b161656e6d36ad63376c307f9273e99d0abcd
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=5.0'
-    - name: espressif/esp-serial-flasher
-      registry_url: https://components.espressif.com
-      require: private
-      version: ~0.0.0
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.2.0
-  espressif/esp_schedule:
-    component_hash: e202a9c688f7f1ab601efb91d682e4bcfaebc508dcceee1a1e0a0d2d1ca75a26
-    dependencies:
-    - name: espressif/rmaker_common
-      registry_url: https://components.espressif.com
-      require: private
-      version: ~1.4.2
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.2.0
-  espressif/esp_secure_cert_mgr:
-    component_hash: 5d9175b416f751ba6a7cb35bdf092f0af85658ce06c4a592c7c541d8017ebeb9
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=4.3'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 2.5.0
-  espressif/jsmn:
-    component_hash: d80350c41bbaa827c98a25b6072df00884e72f54885996fab4a4f0aebce6b6c3
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=4.3'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.1.0
-  espressif/json_generator:
-    component_hash: 45033e1c199b13f1c8c1b544fb7d4e2df6a8e3071ebdcb1b22582b61a7974ff2
-    dependencies: []
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.1.2
-  espressif/json_parser:
-    component_hash: d74b81729ad06ec11ff5eb5b1b0d7df1d00e6027fc11471f4b139c70dcf1b1e4
-    dependencies:
-    - name: espressif/jsmn
-      registry_url: https://components.espressif.com
-      require: private
-      rules:
-      - if: idf_version >=5.0
-      version: ~1.1
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.0.3
-  espressif/libsodium:
-    component_hash: 25b968723c584a2742ca36cebe5a7ef049c6767e059f7b1e1eec69946019025d
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=4.2'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.0.20~2
-  espressif/mdns:
-    component_hash: 4e21149422be01c24d4b1d4dec64fa07d136d8c5d234e931f3ebf375cbde51a0
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=5.0'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.5.2
-  espressif/network_provisioning:
-    component_hash: ef2e10182fd1861e68b821491916327c25416ca7ae70e5a6e43313dbc71fe993
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=5.1'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.0.2
-  espressif/qrcode:
-    component_hash: 3b493771bc5d6ad30cbf87c25bf784aada8a08c941504355b55d6b75518ed7bc
-    dependencies: []
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 0.1.0~2
-  espressif/rmaker_common:
-    component_hash: a3a1df881278d0351fc850b77792fe8a196ddd6dcacbea203d606329cc6a0239
-    dependencies: []
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.4.6
-  idf:
-    source:
-      type: idf
-    version: 5.3.2
-  joltwallet/littlefs:
-    component_hash: add3caf39a265868f70e55f17e8bfb401f200e45a601dc392832e7ac2c1487bc
-    dependencies:
-    - name: idf
-      require: private
-      version: '>=4.3'
-    source:
-      registry_url: https://components.espressif.com
-      type: service
-    version: 1.16.4
-direct_dependencies:
-- espressif/arduino-esp32
-- idf
-manifest_hash: fe35c802ba6a89901a8000205c3dac0c8d85b17fbd036b7a7dcb213e5f6e5361
-target: esp32
-version: 2.0.0

esp/cpp/05_temp-humidity-web/.gitignore

@@ -0,0 +1,4 @@
+build
+managed_components
+dependencies.lock
+sdkconfig.old

esp/cpp/05_temp-humidity-web/CMakeLists.txt

@@ -0,0 +1,18 @@
+# For more information about build system see
+# https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/build-system.html
+# The following five lines of boilerplate have to be in your project's
+# CMakeLists in this exact order for cmake to work correctly
+cmake_minimum_required(VERSION 3.26)
+
+include($ENV{IDF_PATH}/tools/cmake/project.cmake)
+
+project(
+    #[[NAME]]   temp-humidity-web
+    VERSION     0.1
+    DESCRIPTION "Temperature and humidity from DHT sensor served on a web page"
+    LANGUAGES   CXX
+)
+
+# For writing pure cmake components, see the documentation
+# https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-guides/build-system.html#writing-pure-cmake-components
+idf_build_set_property(COMPILE_OPTIONS "-Wno-error" APPEND)

esp/cpp/05_temp-humidity-web/README.md

@@ -0,0 +1,27 @@
+# 05_temp-humidity-web
+
+This is the same example in [03_temp-humidity-web](./../03_temp-humidity-web), ported to the cmake ESP-IDF build system.
+
+For instructions on setting up the ESP-IDF see [04_-esp-idf-arduino](./../04_esp-idf-arduino)
+
+This example is largely adapted from those in [ESP32-basic-starter-kit.pdf](./ESP32-basic-starter-kit.pdf).
+
+The APIs in the original examples paired with this PDF have changed, and I decided to do some different things with the code and/or circuits, but the original code can be [found here](https://www.dropbox.com/scl/fo/6znlij3eb23ih4jxcpv2w/AKvB1t9CCUgoVRVtGen8Yrw?rlkey=z84anl0hs940qf9fpl7l8q8q2&e=1&dl=0).
+
+![schematic](./schematic.png)
+
+Temperature and humidity sensor served on a web page within the local network.
+
+![screenshot](./screenshot.png)
+
+To build this example run the following commands.
+
+```bash
+source ~/path/to/esp-idf/export.sh
+
+mkdir build
+cd build
+cmake ..
+make -j $(nproc)
+make flash
+```

esp/cpp/05_temp-humidity-web/main/CMakeLists.txt

@@ -0,0 +1,4 @@
+idf_component_register(
+    SRCS "main.cpp"
+    INCLUDE_DIRS "."
+)

esp/cpp/05_temp-humidity-web/main/idf_component.yml

@@ -0,0 +1,19 @@
+## IDF Component Manager Manifest File
+dependencies:
+  ## Required IDF version
+  idf:
+    version: '>=4.1.0'
+  # # Put list of dependencies here
+  # # For components maintained by Espressif:
+  # component: "~1.0.0"
+  # # For 3rd party components:
+  # username/component: ">=1.0.0,<2.0.0"
+  # username2/component2:
+  #   version: "~1.0.0"
+  #   # For transient dependencies `public` flag can be set.
+  #   # `public` flag doesn't have an effect dependencies of the `main` component.
+  #   # All dependencies of `main` are public by default.
+  #   public: true
+  espressif/arduino-esp32: ^3.1.1
+  zorxx/dht: ^1.0.1
+  esp32async/espasyncwebserver: ^3.7.0~1

esp/cpp/05_temp-humidity-web/main/main.cpp

@@ -0,0 +1,189 @@
+#include "WiFi.h"
+#include "ESPAsyncWebServer.h"
+#include "main.h"
+
+// Replace with your network credentials
+const char *ssid = "wifi";
+const char *password = "password";
+
+#define DHTPIN GPIO_NUM_4  // Digital pin connected to the DHT sensor
+
+// Uncomment the type of sensor in use:
+#define DHTTYPE      DHT_TYPE_DHT11  // DHT 11
+//#define DHTTYPE    DHT_TYPE_DHT22  // DHT 22 (AM2302)
+//#define DHTTYPE    DHT_TYPE_DHT21  // DHT 21 (AM2301)
+
+float DHT::readTemperature(bool f)
+{
+  float humidity = 0;
+  float temperature = 0;
+  esp_err_t result = dht_read_float_data(type_, gpio_, &humidity,
+                                         &temperature);
+  if (result == ESP_OK) {
+    ESP_LOGI("[DHT::readTemperature]", "Humidity: %.1f%% Temperature: %.1f°C",
+             humidity,
+             temperature);
+  } else {
+    ESP_LOGE("[DHT::readTemperature]", "Failed to read sensor data: %s",
+             esp_err_to_name(result));
+  }
+  return f ? (temperature * 1.8f) + 32 : temperature;
+}
+
+float DHT::readHumidity()
+{
+  float humidity = 0;
+  float temperature = 0;
+  esp_err_t result = dht_read_float_data(type_, gpio_, &humidity,
+                                         &temperature);
+  if (result == ESP_OK) {
+    ESP_LOGI("[DHT::readTemperature]", "Humidity: %.1f%% Temperature: %.1f°C",
+             humidity,
+             temperature);
+  } else {
+    ESP_LOGE("[DHT::readTemperature]", "Failed to read sensor data: %s",
+             esp_err_to_name(result));
+  }
+  return humidity;
+}
+
+DHT dht(DHTPIN, DHTTYPE);
+
+// Create AsyncWebServer object on port 80
+AsyncWebServer server(80);
+
+String readDHTTemperature()
+{
+  // Sensor readings may also be up to 2 seconds 'old' (its a very slow sensor)
+  float t = dht.readTemperature();
+  // Check if any reads failed and exit early (to try again).
+  if (isnan(t)) {
+    Serial.println("Failed to read from DHT sensor!");
+    return "--";
+  } else {
+    Serial.println(t);
+    return String(t);
+  }
+}
+
+String readDHTHumidity()
+{
+  // Sensor readings may also be up to 2 seconds 'old' (its a very slow sensor)
+  float h = dht.readHumidity();
+  if (isnan(h)) {
+    Serial.println("Failed to read from DHT sensor!");
+    return "--";
+  } else {
+    Serial.println(h);
+    return String(h);
+  }
+}
+
+const char index_html[] PROGMEM = R"rawliteral(
+<!DOCTYPE HTML><html>
+<head>
+  <meta name="viewport" content="width=device-width, initial-scale=1">
+  <link rel="stylesheet" href="https://use.fontawesome.com/releases/v5.7.2/css/all.css" integrity="sha384-fnmOCqbTlWIlj8LyTjo7mOUStjsKC4pOpQbqyi7RrhN7udi9RwhKkMHpvLbHG9Sr" crossorigin="anonymous">
+  <style>
+    html {
+     font-family: Arial;
+     display: inline-block;
+     margin: 0px auto;
+     text-align: center;
+    }
+    h2 { font-size: 3.0rem; }
+    p { font-size: 3.0rem; }
+    .units { font-size: 1.2rem; }
+    .dht-labels{
+      font-size: 1.5rem;
+      vertical-align:middle;
+      padding-bottom: 15px;
+    }
+  </style>
+</head>
+<body>
+  <h2>ESP32 DHT Server</h2>
+  <p>
+    <i class="fas fa-thermometer-half" style="color:#059e8a;"></i>
+    <span class="dht-labels">Temperature</span>
+    <span id="temperature">%TEMPERATURE%</span>
+    <sup class="units">&deg;C</sup>
+  </p>
+  <p>
+    <i class="fas fa-tint" style="color:#00add6;"></i>
+    <span class="dht-labels">Humidity</span>
+    <span id="humidity">%HUMIDITY%</span>
+    <sup class="units">&percnt;</sup>
+  </p>
+</body>
+<script>
+setInterval(function ( ) {
+  var xhttp = new XMLHttpRequest();
+  xhttp.onreadystatechange = function() {
+    if (this.readyState == 4 && this.status == 200) {
+      document.getElementById("temperature").innerHTML = this.responseText;
+    }
+  };
+  xhttp.open("GET", "/temperature", true);
+  xhttp.send();
+}, 10000 ) ;
+
+setInterval(function ( ) {
+  var xhttp = new XMLHttpRequest();
+  xhttp.onreadystatechange = function() {
+    if (this.readyState == 4 && this.status == 200) {
+      document.getElementById("humidity").innerHTML = this.responseText;
+    }
+  };
+  xhttp.open("GET", "/humidity", true);
+  xhttp.send();
+}, 10000 ) ;
+</script>
+</html>)rawliteral";
+
+// Replaces placeholder with DHT values
+String processor(const String &var)
+{
+  //Serial.println(var);
+  if (var == "TEMPERATURE") {
+    return readDHTTemperature();
+  } else if (var == "HUMIDITY") {
+    return readDHTHumidity();
+  }
+  return String();
+}
+
+void setup()
+{
+  // Serial port for debugging purposes
+  Serial.begin(115200);
+
+  // Connect to Wi-Fi
+  WiFi.begin(ssid, password);
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(1000);
+    Serial.println("Connecting to WiFi..");
+  }
+
+  // Print ESP32 Local IP Address
+  Serial.println(WiFi.localIP());
+
+  // Route for root / web page
+  server.on("/", HTTP_GET, [ ](AsyncWebServerRequest *request) {
+    request->send(200, "text/html", index_html, processor);
+  });
+  server.on("/temperature", HTTP_GET, [ ](AsyncWebServerRequest *request) {
+    request->send(200, "text/plain", readDHTTemperature().c_str());
+  });
+  server.on("/humidity", HTTP_GET, [ ](AsyncWebServerRequest *request) {
+    request->send(200, "text/plain", readDHTHumidity().c_str());
+  });
+
+  // Start server
+  server.begin();
+}
+
+void loop()
+{
+
+}

esp/cpp/05_temp-humidity-web/main/main.h

@@ -0,0 +1,33 @@
+#ifndef  MAIN_H
+#define  MAIN_H
+
+#include <cstdint>
+#include "dht.h"
+
+class DHT {
+public:
+  DHT(gpio_num_t gpio, dht_sensor_type_t type) :
+      gpio_(gpio), type_(type) { }
+
+  ~DHT() = default;
+
+  /**
+   * Read temperature from DHT sensor
+   *
+   * @param f True to return in Fahrenheit, False for Celsius.
+   */
+  float readTemperature(bool f = true);
+
+  /**
+   * Read humidity from DHT sensor.
+   */
+  float readHumidity();
+
+private:
+  gpio_num_t gpio_;
+  dht_sensor_type_t type_;
+
+};
+
+
+#endif // MAIN_H

esp/cpp/06_i2c-scanner/.gitignore

@@ -0,0 +1,4 @@
+build
+managed_components
+dependencies.lock
+sdkconfig.old

esp/cpp/06_i2c-scanner/CMakeLists.txt

@@ -0,0 +1,17 @@
+# For more information about build system see
+# https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/build-system.html
+# The following five lines of boilerplate have to be in your project's
+# CMakeLists in this exact order for cmake to work correctly
+cmake_minimum_required(VERSION 3.26)
+
+include($ENV{IDF_PATH}/tools/cmake/project.cmake)
+
+project(
+    #[[NAME]]   i2c-scanner
+    VERSION     0.1
+    DESCRIPTION "Simple I2C device scanner"
+    LANGUAGES   CXX
+)
+# For writing pure cmake components, see the documentation
+# https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-guides/build-system.html#writing-pure-cmake-components
+idf_build_set_property(COMPILE_OPTIONS "-Wno-error" APPEND)

esp/cpp/06_i2c-scanner/README.md

@@ -0,0 +1,32 @@
+# 06_i2c-scanner
+
+![schematic](./schematic.png)
+
+Simple I2C device scanner.
+
+For this example I used this [SSD1306 OLED display](https://www.digikey.com/en/products/detail/winstar-display/WEA012864DWPP3N00003/20533255).
+
+To build the example run the following commands.
+
+```bash
+source ~/path/to/esp-idf/export.sh
+
+mkdir build
+cd build
+cmake ..
+make -j $(nproc)
+
+# Flash to ESP32
+make flash
+
+# Open Serial Monitor, press CTRL+] to exit.
+make monitor
+```
+
+Expected output in serial monitor at 115200 baud
+
+```bash
+Scanning I2C devices...
+[0x3c]: Device found with clock rate 100000 and timeout 50
+Done.
+```

esp/cpp/06_i2c-scanner/main/CMakeLists.txt

@@ -0,0 +1,4 @@
+idf_component_register(
+    SRCS "main.cpp"
+    INCLUDE_DIRS "."
+)

esp/cpp/06_i2c-scanner/main/idf_component.yml

@@ -0,0 +1,17 @@
+## IDF Component Manager Manifest File
+dependencies:
+  ## Required IDF version
+  idf:
+    version: '>=4.1.0'
+  # # Put list of dependencies here
+  # # For components maintained by Espressif:
+  # component: "~1.0.0"
+  # # For 3rd party components:
+  # username/component: ">=1.0.0,<2.0.0"
+  # username2/component2:
+  #   version: "~1.0.0"
+  #   # For transient dependencies `public` flag can be set.
+  #   # `public` flag doesn't have an effect dependencies of the `main` component.
+  #   # All dependencies of `main` are public by default.
+  #   public: true
+  espressif/arduino-esp32: ^3.1.1

esp/cpp/06_i2c-scanner/main/main.cpp

@@ -0,0 +1,35 @@
+#include "Arduino.h"
+#include "Wire.h"
+
+[[maybe_unused]] static const char *TAG = "i2c-scanner";
+
+void i2c_scan()
+{
+  uint8_t device_num = 0;
+  Serial.println("Scanning I2C devices...");
+  for (byte address = 1; address < 127; address++) {
+    Wire.beginTransmission(address);
+    byte error = Wire.endTransmission();
+    if (error == 0) {
+      Serial.printf(
+          "[0x%.2x]: Device found with clock rate %lu and timeout %u\n",
+          address,
+          Wire.getClock(), Wire.getTimeOut());
+      device_num++;
+    } else if (error == 4) {
+      Serial.printf("[0x%.2x]: Unknown error.\n", address);
+    }
+  }
+  Serial.println(device_num > 0 ? "Done.\n" : "No I2C devices found.\n");
+}
+
+void setup()
+{
+  Serial.begin(115200);
+  Wire.begin();
+}
+
+void loop()
+{
+  i2c_scan();
+}

esp/cpp/06_i2c-scanner/sdkconfig

@@ -2176,3 +2176,230 @@ CONFIG_LITTLEFS_ASSERTS=y
 # end of Component config
 
 # CONFIG_IDF_EXPERIMENTAL_FEATURES is not set
+
+# Deprecated options for backward compatibility
+# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set
+# CONFIG_NO_BLOBS is not set
+# CONFIG_ESP32_NO_BLOBS is not set
+# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
+# CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set
+# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
+# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
+# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
+CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
+# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
+# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
+CONFIG_LOG_BOOTLOADER_LEVEL=3
+# CONFIG_APP_ROLLBACK_ENABLE is not set
+# CONFIG_FLASH_ENCRYPTION_ENABLED is not set
+# CONFIG_FLASHMODE_QIO is not set
+# CONFIG_FLASHMODE_QOUT is not set
+CONFIG_FLASHMODE_DIO=y
+# CONFIG_FLASHMODE_DOUT is not set
+CONFIG_MONITOR_BAUD=115200
+# CONFIG_ESP_RMAKER_LOCAL_CTRL_ENABLE is not set
+CONFIG_OPTIMIZATION_LEVEL_DEBUG=y
+CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y
+CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
+# CONFIG_OPTIMIZATION_LEVEL_RELEASE is not set
+# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
+CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
+# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
+# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
+CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2
+# CONFIG_CXX_EXCEPTIONS is not set
+CONFIG_STACK_CHECK_NONE=y
+# CONFIG_STACK_CHECK_NORM is not set
+# CONFIG_STACK_CHECK_STRONG is not set
+# CONFIG_STACK_CHECK_ALL is not set
+# CONFIG_WARN_WRITE_STRINGS is not set
+# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
+CONFIG_ESP32_APPTRACE_DEST_NONE=y
+CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
+CONFIG_ADC2_DISABLE_DAC=y
+# CONFIG_MCPWM_ISR_IN_IRAM is not set
+# CONFIG_EVENT_LOOP_PROFILING is not set
+CONFIG_POST_EVENTS_FROM_ISR=y
+CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
+CONFIG_GDBSTUB_SUPPORT_TASKS=y
+CONFIG_GDBSTUB_MAX_TASKS=32
+# CONFIG_OTA_ALLOW_HTTP is not set
+# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set
+CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
+CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
+# CONFIG_ESP_SYSTEM_PD_FLASH is not set
+CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000
+CONFIG_ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY=2000
+CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y
+CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
+# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set
+# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set
+# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set
+# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set
+# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set
+# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set
+CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024
+# CONFIG_ESP32_XTAL_FREQ_26 is not set
+CONFIG_ESP32_XTAL_FREQ_40=y
+# CONFIG_ESP32_XTAL_FREQ_AUTO is not set
+CONFIG_ESP32_XTAL_FREQ=40
+CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
+# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
+CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
+CONFIG_ESP32_PHY_MAX_TX_POWER=20
+# CONFIG_REDUCE_PHY_TX_POWER is not set
+# CONFIG_ESP32_REDUCE_PHY_TX_POWER is not set
+# CONFIG_SPIRAM_SUPPORT is not set
+# CONFIG_ESP32_SPIRAM_SUPPORT is not set
+# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set
+CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y
+# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set
+CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160
+CONFIG_TRACEMEM_RESERVE_DRAM=0x0
+# CONFIG_ESP32_PANIC_PRINT_HALT is not set
+CONFIG_ESP32_PANIC_PRINT_REBOOT=y
+# CONFIG_ESP32_PANIC_SILENT_REBOOT is not set
+# CONFIG_ESP32_PANIC_GDBSTUB is not set
+CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
+CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
+CONFIG_MAIN_TASK_STACK_SIZE=3584
+CONFIG_CONSOLE_UART_DEFAULT=y
+# CONFIG_CONSOLE_UART_CUSTOM is not set
+# CONFIG_CONSOLE_UART_NONE is not set
+# CONFIG_ESP_CONSOLE_UART_NONE is not set
+CONFIG_CONSOLE_UART=y
+CONFIG_CONSOLE_UART_NUM=0
+CONFIG_CONSOLE_UART_BAUDRATE=115200
+CONFIG_INT_WDT=y
+CONFIG_INT_WDT_TIMEOUT_MS=300
+CONFIG_INT_WDT_CHECK_CPU1=y
+CONFIG_TASK_WDT=y
+CONFIG_ESP_TASK_WDT=y
+# CONFIG_TASK_WDT_PANIC is not set
+CONFIG_TASK_WDT_TIMEOUT_S=5
+CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
+CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
+# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set
+CONFIG_ESP32_DEBUG_OCDAWARE=y
+CONFIG_BROWNOUT_DET=y
+CONFIG_ESP32_BROWNOUT_DET=y
+CONFIG_BROWNOUT_DET_LVL_SEL_0=y
+CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y
+# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
+# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set
+# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
+# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set
+# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
+# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set
+# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
+# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set
+# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
+# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set
+# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
+# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set
+# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set
+# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set
+CONFIG_BROWNOUT_DET_LVL=0
+CONFIG_ESP32_BROWNOUT_DET_LVL=0
+# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set
+CONFIG_IPC_TASK_STACK_SIZE=1024
+CONFIG_TIMER_TASK_STACK_SIZE=3584
+CONFIG_ESP32_WIFI_ENABLED=y
+CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
+CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
+# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
+CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
+CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
+CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
+# CONFIG_ESP32_WIFI_CSI_ENABLED is not set
+CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
+CONFIG_ESP32_WIFI_TX_BA_WIN=6
+CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
+CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
+CONFIG_ESP32_WIFI_RX_BA_WIN=6
+CONFIG_ESP32_WIFI_RX_BA_WIN=6
+CONFIG_ESP32_WIFI_NVS_ENABLED=y
+CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
+# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
+CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
+CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
+CONFIG_ESP32_WIFI_IRAM_OPT=y
+CONFIG_ESP32_WIFI_RX_IRAM_OPT=y
+CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y
+CONFIG_ESP32_WIFI_ENABLE_WPA3_OWE_STA=y
+CONFIG_WPA_MBEDTLS_CRYPTO=y
+CONFIG_WPA_MBEDTLS_TLS_CLIENT=y
+# CONFIG_WPA_WAPI_PSK is not set
+# CONFIG_WPA_11KV_SUPPORT is not set
+# CONFIG_WPA_MBO_SUPPORT is not set
+# CONFIG_WPA_DPP_SUPPORT is not set
+# CONFIG_WPA_11R_SUPPORT is not set
+# CONFIG_WPA_WPS_SOFTAP_REGISTRAR is not set
+# CONFIG_WPA_WPS_STRICT is not set
+# CONFIG_WPA_DEBUG_PRINT is not set
+# CONFIG_WPA_TESTING_OPTIONS is not set
+# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
+# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
+CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
+CONFIG_TIMER_TASK_PRIORITY=1
+CONFIG_TIMER_TASK_STACK_DEPTH=2048
+CONFIG_TIMER_QUEUE_LENGTH=10
+# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
+# CONFIG_HAL_ASSERTION_SILIENT is not set
+# CONFIG_L2_TO_L3_COPY is not set
+CONFIG_ESP_GRATUITOUS_ARP=y
+CONFIG_GARP_TMR_INTERVAL=60
+CONFIG_TCPIP_RECVMBOX_SIZE=32
+CONFIG_TCP_MAXRTX=12
+CONFIG_TCP_SYNMAXRTX=12
+CONFIG_TCP_MSS=1440
+CONFIG_TCP_MSL=60000
+CONFIG_TCP_SND_BUF_DEFAULT=5760
+CONFIG_TCP_WND_DEFAULT=5760
+CONFIG_TCP_RECVMBOX_SIZE=6
+CONFIG_TCP_QUEUE_OOSEQ=y
+CONFIG_TCP_OVERSIZE_MSS=y
+# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
+# CONFIG_TCP_OVERSIZE_DISABLE is not set
+CONFIG_UDP_RECVMBOX_SIZE=6
+CONFIG_TCPIP_TASK_STACK_SIZE=3072
+CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
+# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
+# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
+CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
+# CONFIG_PPP_SUPPORT is not set
+CONFIG_ESP32_TIME_SYSCALL_USE_RTC_HRT=y
+CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
+# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set
+# CONFIG_ESP32_TIME_SYSCALL_USE_HRT is not set
+# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set
+# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set
+CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
+CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
+CONFIG_ESP32_PTHREAD_STACK_MIN=768
+CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
+# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set
+# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set
+CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
+CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
+CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
+# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set
+# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
+# CONFIG_ESP32_ULP_COPROC_ENABLED is not set
+CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
+CONFIG_SUPPORT_TERMIOS=y
+CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
+CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=3000
+CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
+CONFIG_MB_QUEUE_LENGTH=20
+CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096
+CONFIG_MB_SERIAL_BUF_SIZE=256
+CONFIG_MB_SERIAL_TASK_PRIO=10
+CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y
+CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233
+CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
+CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
+CONFIG_MB_CONTROLLER_STACK_SIZE=4096
+CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
+# CONFIG_MB_TIMER_PORT_ENABLED is not set
+# End of deprecated options

esp/cpp/07_lcd-panel/.gitignore

@@ -0,0 +1,4 @@
+build
+managed_components
+dependencies.lock
+sdkconfig.old

esp/cpp/07_lcd-panel/CMakeLists.txt

@@ -0,0 +1,17 @@
+# For more information about build system see
+# https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/build-system.html
+# The following five lines of boilerplate have to be in your project's
+# CMakeLists in this exact order for cmake to work correctly
+cmake_minimum_required(VERSION 3.26)
+
+include($ENV{IDF_PATH}/tools/cmake/project.cmake)
+
+project(
+    #[[NAME]]   lcd-panel
+    VERSION     0.1
+    DESCRIPTION "Example of using the SSD1306 LCD display with ESP-IDF and LVGL"
+    LANGUAGES   CXX
+)
+# For writing pure cmake components, see the documentation
+# https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-guides/build-system.html#writing-pure-cmake-components
+idf_build_set_property(COMPILE_OPTIONS "-Wno-error" APPEND)

esp/cpp/07_lcd-panel/README.md

@@ -0,0 +1,33 @@
+# 06_lcd-panel
+
+This example is largely adapted from those in [ESP32-basic-starter-kit.pdf](./ESP32-basic-starter-kit.pdf).
+
+The APIs in the original examples paired with this PDF have changed, and I decided to do some different things with the code and/or circuits, but the original code can be [found here](https://www.dropbox.com/scl/fo/6znlij3eb23ih4jxcpv2w/AKvB1t9CCUgoVRVtGen8Yrw?rlkey=z84anl0hs940qf9fpl7l8q8q2&e=1&dl=0).
+
+This is the same example in [03_temp-humidity-web](./../03_temp-humidity-web), ported to the cmake ESP-IDF build system.
+
+For instructions on setting up the ESP-IDF see [04_-esp-idf-arduino](./../04_esp-idf-arduino)
+
+This example is largely adapted from those in [ESP32-basic-starter-kit.pdf](./ESP32-basic-starter-kit.pdf).
+
+The APIs in the original examples paired with this PDF have changed, and I decided to do some different things with the code and/or circuits, but the original code can be [found here](https://www.dropbox.com/scl/fo/6znlij3eb23ih4jxcpv2w/AKvB1t9CCUgoVRVtGen8Yrw?rlkey=z84anl0hs940qf9fpl7l8q8q2&e=1&dl=0).
+
+![schematic](./schematic.png)
+
+Temperature and humidity sensor served on a web page within the local network.
+
+![screenshot](./screenshot.png)
+
+To build this example run the following commands.
+
+```bash
+source ~/path/to/esp-idf/export.sh
+
+mkdir build
+cd build
+cmake ..
+make -j $(nproc)
+make flash
+```
+
+[ESP-IDF I2C documentation](https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-reference/peripherals/i2c.html)

esp/cpp/07_lcd-panel/main/CMakeLists.txt

@@ -0,0 +1,5 @@
+idf_component_register(
+    SRCS main.cpp display.cpp panel_device.cpp ssd1306.cpp
+    INCLUDE_DIRS .
+    REQUIRES driver
+)

esp/cpp/07_lcd-panel/main/display.cpp

@@ -0,0 +1,212 @@
+
+#include "display.h"
+#include "ssd1306.h"
+
+#include "widgets/label/lv_label.h"
+#include <esp_log.h>
+#include <esp_lcd_panel_ops.h>
+#include <esp_heap_caps.h>
+#include <esp_lcd_panel_io.h>
+#include <esp_timer.h>
+#include <lv_init.h>
+#include <display/lv_display.h>
+#include <driver/i2c_master.h>
+#include <mutex>
+
+// LVGL library is not thread-safe, this example calls LVGL APIs from tasks.
+// We must use a mutex to protect it.
+_lock_t ScopedLock::lock_;
+
+Display::Display(IPanelDevice *device) :
+    panel_(device)
+{
+  if (!lv_is_initialized()) {
+    ESP_LOGI(TAG, "Initialize LVGL");
+    lv_init();
+  }
+
+  // Create a lvgl display.
+  lv_display_ = panel_.device_->create_display();
+  // associate the i2c panel handle to the display
+  lv_display_set_user_data(lv_display_, panel_.esp_panel_);
+
+  // Create draw buffer.
+  ESP_LOGI(TAG, "Allocate separate LVGL draw buffers");
+  lv_buf_ = heap_caps_calloc(1, panel_.device_->lv_buf_size_,
+                             MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT);
+  assert(lv_buf_);
+
+  // LVGL9 suooprt new monochromatic format.
+  lv_display_set_color_format(lv_display_, LV_COLOR_FORMAT_I1);
+  // Initialize LVGL draw buffers.
+  lv_display_set_buffers(lv_display_, lv_buf_, nullptr,
+                         panel_.device_->lv_buf_size_,
+                         LV_DISPLAY_RENDER_MODE_FULL);
+  lv_display_set_rotation(lv_display_, LV_DISPLAY_ROTATION_0);
+  // Set callback which can copy the rendered image to an area of the display.
+  lv_display_set_flush_cb(lv_display_, Display::lvgl_flush_cb);
+
+  ESP_LOGI(TAG, "Register io panel callback for LVGL flush ready notification");
+  const esp_lcd_panel_io_callbacks_t cbs = {
+      .on_color_trans_done = Display::lvgl_flush_ready,
+  };
+  /* Register done callback */
+  ESP_ERROR_CHECK(
+      esp_lcd_panel_io_register_event_callbacks(panel_.io_handle_, &cbs,
+                                                lv_display_));
+
+  // TODO: What is this
+  ESP_LOGI(TAG, "Use esp_timer as LVGL tick timer");
+  const esp_timer_create_args_t lvgl_tick_timer_args = {
+      .callback = &Display::lvgl_increase_tick,
+      .name = "lvgl_tick"
+  };
+  esp_timer_handle_t lvgl_tick_timer = nullptr;
+  ESP_ERROR_CHECK(esp_timer_create(&lvgl_tick_timer_args, &lvgl_tick_timer));
+  ESP_ERROR_CHECK(esp_timer_start_periodic(lvgl_tick_timer,
+                                           LVGL_TICK_PERIOD_MS * 1000));
+
+  ESP_LOGI(TAG, "Create LVGL task");
+  xTaskCreate(Display::lvgl_port_task, "LVGL", LVGL_TASK_STACK_SIZE,
+              nullptr, LVGL_TASK_PRIORITY, nullptr);
+}
+
+void Display::set_text(const char *text,
+                       const char *name,
+                       lv_label_long_mode_t long_mode,
+                       lv_align_t align)
+{
+  // Lock the mutex due to the LVGL APIs are not thread-safe.
+  ScopedLock lock;
+
+  ESP_LOGI(TAG, "Display LVGL Scroll Text");
+  lv_obj_t *scr = lv_display_get_screen_active(lv_display_);
+  objects_[name] = lv_label_create(scr);
+
+  // Circular scroll.
+  auto obj = objects_[name];
+  lv_label_set_long_mode(obj, long_mode);
+  lv_label_set_text(obj, text);
+
+  // Set the size of the screen.
+  // If you use rotation 90 or 270 use lv_display_get_vertical_resolution.
+  lv_obj_set_width(obj, lv_display_get_horizontal_resolution(lv_display_));
+  lv_obj_align(obj, align, 0, 0);
+}
+
+bool Display::lvgl_flush_ready(esp_lcd_panel_io_handle_t,
+                               esp_lcd_panel_io_event_data_t *,
+                               void *user_ctx)
+{
+  auto *disp = (lv_display_t *) user_ctx;
+  lv_display_flush_ready(disp);
+  return false;
+}
+
+void Display::lvgl_flush_cb(lv_display_t *display, const lv_area_t *area,
+                            uint8_t *px_map)
+{
+  auto panel_handle =
+      (esp_lcd_panel_handle_t) lv_display_get_user_data(display);
+
+  // Necessary because LVGL reserves 2x4 bytes in the buffer for a palette.
+  // For more information about the monochrome, please refer to:
+  // https://docs.lvgl.io/9.2/porting/display.html#monochrome-displays
+  // Skip the palette here.
+  px_map += LVGL_PALETTE_SIZE;
+
+  uint16_t hor_res = lv_display_get_physical_horizontal_resolution(display);
+  int32_t x1 = area->x1;
+  int32_t x2 = area->x2;
+  int32_t y1 = area->y1;
+  int32_t y2 = area->y2;
+
+  for (int32_t y = y1; y <= y2; y++) {
+    for (int32_t x = x1; x <= x2; x++) {
+      /* The order of bits is MSB first.
+                  MSB           LSB
+         bits      7 6 5 4 3 2 1 0
+         pixels    0 1 2 3 4 5 6 7
+                  Left         Right
+      */
+      bool chroma_color = (px_map[(hor_res >> 3) * y + (x >> 3)] &
+                           1 << (7 - x % 8));
+
+      // Write to the buffer as required for the display.
+      // It writes only 1-bit for monochrome displays mapped vertically.
+      uint8_t *buf = SSD1306::oled_buffer_ + hor_res * (y >> 3) + (x);
+      if (chroma_color) {
+        (*buf) &= ~(1 << (y % 8));
+      } else {
+        (*buf) |= (1 << (y % 8));
+      }
+    }
+  }
+  // Pass the draw buffer to the driver.
+  ESP_ERROR_CHECK(
+      esp_lcd_panel_draw_bitmap(panel_handle, x1, y1, x2 + 1, y2 + 1,
+                                SSD1306::oled_buffer_));
+}
+
+void Display::lvgl_increase_tick(void *)
+{
+  // Tell LVGL how many milliseconds has elapsed
+  lv_tick_inc(LVGL_TICK_PERIOD_MS);
+}
+
+[[noreturn]] void Display::lvgl_port_task(void *)
+{
+  ESP_LOGI(TAG, "Starting LVGL task");
+  for (uint32_t time_till_next_ms = 0; true;) {
+    _lock_acquire(&ScopedLock::lock_);
+    time_till_next_ms = lv_timer_handler();
+    _lock_release(&ScopedLock::lock_);
+    usleep(1000 * time_till_next_ms);
+  }
+}
+
+I2C::I2C(gpio_num_t sda, gpio_num_t scl) :
+    i2c_bus_(nullptr),
+    bus_config_(
+        (i2c_master_bus_config_t) {
+            .i2c_port = I2C_BUS_PORT,
+            .sda_io_num = sda,
+            .scl_io_num = scl,
+            .clk_source = I2C_CLK_SRC_DEFAULT,
+            .glitch_ignore_cnt = 7,
+            .flags {
+                .enable_internal_pullup = true,
+            },
+        }
+    )
+{
+  ESP_LOGI(TAG, "Initialize I2C bus");
+  ESP_ERROR_CHECK(i2c_new_master_bus(&bus_config_, &i2c_bus_));
+}
+
+Panel::Panel(IPanelDevice *device) :
+    device_(device),
+    io_handle_(nullptr),
+    esp_panel_(nullptr),
+    // According to SSD1306 datasheet
+    panel_config_(
+        (esp_lcd_panel_dev_config_t) {
+            .reset_gpio_num = device_->reset_gpio_num_,
+            .bits_per_pixel = 1,
+            // .vendor_config should be set in IPanelDevice::init_panel override
+        }
+    )
+{
+  ESP_LOGI(TAG, "Install panel IO");
+  ESP_ERROR_CHECK(esp_lcd_new_panel_io_i2c(
+      device_->i2c_bus_, &device_->io_config_, &io_handle_));
+
+  device_->create_panel(panel_config_, io_handle_, esp_panel_);
+
+  ESP_LOGI(TAG, "Resetting panel display");
+  ESP_ERROR_CHECK(esp_lcd_panel_reset(esp_panel_));
+  ESP_LOGI(TAG, "Initializing panel display");
+  ESP_ERROR_CHECK(esp_lcd_panel_init(esp_panel_));
+  ESP_LOGI(TAG, "Turning on panel display");
+  ESP_ERROR_CHECK(esp_lcd_panel_disp_on_off(esp_panel_, true));
+}

esp/cpp/07_lcd-panel/main/display.h

@@ -0,0 +1,105 @@
+#ifndef DISPLAY_H
+#define DISPLAY_H
+
+#include <esp_lcd_types.h>
+#include <esp_lcd_panel_ssd1306.h>
+#include <driver/i2c_types.h>
+#include <driver/i2c_master.h>
+#include <unordered_map>
+#include <esp_lcd_panel_ops.h>
+#include <esp_lcd_panel_io.h>
+#include "misc/lv_types.h"
+#include "misc/lv_area.h"
+#include "display/lv_display.h"
+#include "widgets/label/lv_label.h"
+
+#include "panel_device.h"
+
+#define I2C_BUS_PORT  0
+#define LVGL_TICK_PERIOD_MS    5
+#define LVGL_TASK_STACK_SIZE   (4 * 1024)
+#define LVGL_TASK_PRIORITY     2
+
+struct I2C {
+  I2C(gpio_num_t sda, gpio_num_t scl);
+
+  ~I2C() = default;
+
+  i2c_master_bus_handle_t i2c_bus_;
+
+private:
+  i2c_master_bus_config_t bus_config_;
+};
+
+struct ScopedLock {
+  explicit ScopedLock() { _lock_acquire(&lock_); }
+
+  ~ScopedLock() { _lock_release(&lock_); }
+
+  // LVGL library is not thread-safe, this example calls LVGL APIs from tasks.
+  // We must use a mutex to protect it.
+  static _lock_t lock_;
+};
+
+class Panel {
+public:
+  explicit Panel(IPanelDevice *device);
+
+  ~Panel() = default;
+
+  IPanelDevice *device_;
+
+  esp_lcd_panel_io_handle_t io_handle_;
+
+  esp_lcd_panel_handle_t esp_panel_;
+
+private:
+  esp_lcd_panel_dev_config_t panel_config_;
+};
+
+class Display {
+public:
+  explicit Display(IPanelDevice *device);
+
+  ~Display() = default;
+
+  [[nodiscard]] inline const lv_display_t *get() const { return lv_display_; }
+
+  [[nodiscard]] inline lv_display_t *get() { return lv_display_; }
+
+  [[nodiscard]] inline const lv_display_t *operator*() const { return get(); }
+
+  [[nodiscard]] inline lv_display_t *operator*() { return get(); }
+
+  void set_text(const char *text,
+                const char *name,
+                lv_label_long_mode_t long_mode = LV_LABEL_LONG_SCROLL_CIRCULAR,
+                lv_align_t align = LV_ALIGN_TOP_MID);
+
+  static bool lvgl_flush_ready(esp_lcd_panel_io_handle_t panel,
+                               esp_lcd_panel_io_event_data_t *data,
+                               void *user_ctx);
+
+  static void lvgl_flush_cb(lv_display_t *display,
+                            const lv_area_t *area,
+                            uint8_t *px_map);
+
+  static void lvgl_increase_tick(void *arg);
+
+  [[noreturn]] static void lvgl_port_task(void *arg);
+
+private:
+  Panel panel_;
+
+  lv_display_t *lv_display_;
+
+  // Draw buffer associated with the lv_display_t.
+  void *lv_buf_;
+
+  // Objects stored in the screen associated with this display.
+  // @sa Display::set_text
+  // @sa lv_display_get_screen_active
+  std::unordered_map<const char *, lv_obj_t *> objects_;
+};
+
+#endif // DISPLAY_H

esp/cpp/07_lcd-panel/main/idf_component.yml

@@ -0,0 +1,5 @@
+## IDF Component Manager Manifest File
+dependencies:
+  espressif/arduino-esp32: ^3.1.1
+  lvgl/lvgl: "9.2.0"
+  esp_lcd_sh1107: "^1"

esp/cpp/07_lcd-panel/main/main.cpp

@@ -0,0 +1,31 @@
+#include "display.h"
+#include "ssd1306.h"
+
+// Pin may vary based on your schematic.
+#define PIN_SDA                GPIO_NUM_21
+#define PIN_SCL                GPIO_NUM_22
+#define PIN_RST                -1
+
+// TODO: Can this be static since there can only be one initialization?
+// TODO: Store RST in I2C and retrieve within SSD instead of the #define
+I2C i2c(PIN_SDA, PIN_SCL);
+
+void setup()
+{
+  SSD1306 ssd1306(i2c.i2c_bus_);
+  Display d(&ssd1306);
+
+  d.set_text("Test test 12345678910",
+             "test-text1",
+             LV_LABEL_LONG_SCROLL,
+             LV_ALIGN_CENTER);
+
+  d.set_text("Hello hello hello hello hello hello hello hello!", "test-text2");
+
+  d.set_text("A random sentence with no meaning at all.",
+             "test-text3",
+             LV_LABEL_LONG_CLIP,
+             LV_ALIGN_BOTTOM_MID);
+}
+
+void loop() { }

esp/cpp/07_lcd-panel/main/main.h

@@ -0,0 +1,4 @@
+#ifndef  MAIN_H
+#define  MAIN_H
+
+#endif // MAIN_H

esp/cpp/07_lcd-panel/main/panel_device.cpp

@@ -0,0 +1,2 @@
+
+#include "panel_device.h"

esp/cpp/07_lcd-panel/main/panel_device.h

@@ -0,0 +1,65 @@
+#ifndef PANEL_DEVICE_H
+#define PANEL_DEVICE_H
+
+#include <esp_lcd_panel_dev.h>
+#include <esp_lcd_panel_ops.h>
+#include <esp_lcd_panel_ssd1306.h>
+#include <driver/i2c_types.h>
+#include <esp_lcd_panel_io.h>
+#include <esp_log.h>
+#include "display/lv_display.h"
+
+#define LVGL_PALETTE_SIZE      8
+
+static const char *TAG = "lcd-panel";
+
+class IPanelDevice {
+public:
+  explicit IPanelDevice(i2c_master_bus_handle_t i2c,
+                        int reset_gpio_num,
+                        esp_lcd_panel_io_i2c_config_t io_config) :
+      reset_gpio_num_(reset_gpio_num),
+      i2c_bus_(i2c),
+      io_config_(io_config) { }
+
+  virtual ~IPanelDevice() = default;
+
+  [[nodiscard]] lv_display_t *create_display() const
+  {
+    auto display = lv_display_create(width_, height_);
+    assert(display);
+    return display;
+  }
+
+  void create_panel(esp_lcd_panel_dev_config_t &config,
+                    esp_lcd_panel_io_handle_t io,
+                    esp_lcd_panel_handle_t &panel)
+  {
+    // If the passed handle is already allocated, delete it.
+    if (panel != nullptr) {
+      ESP_LOGI(TAG, "Removing unused panel");
+      esp_lcd_panel_del(panel);
+    }
+
+    ESP_LOGI(TAG, "Install SSD1306 panel driver");
+    init_panel(config, io, panel);
+  }
+
+  int32_t width_;
+  int32_t height_;
+  int reset_gpio_num_;
+
+  // LVGL reserves 2x4 bytes in the buffer to be used as a palette.
+  size_t lv_buf_size_;
+  // TODO: Can we use a static accessor in I2C instead?
+  i2c_master_bus_handle_t i2c_bus_;
+
+  esp_lcd_panel_io_i2c_config_t io_config_;
+
+private:
+  virtual void init_panel(esp_lcd_panel_dev_config_t &config,
+                          esp_lcd_panel_io_handle_t io,
+                          esp_lcd_panel_handle_t &panel) = 0;
+};
+
+#endif // PANEL_DEVICE_H

esp/cpp/07_lcd-panel/main/ssd1306.cpp

@@ -0,0 +1,37 @@
+
+#include "ssd1306.h"
+
+// To use LV_COLOR_FORMAT_I1 we need an extra buffer to hold the converted data.
+uint8_t SSD1306::oled_buffer_[LCD_H_RES * LCD_V_RES / 8];
+
+SSD1306::SSD1306(i2c_master_bus_handle_t i2c,
+                 esp_lcd_panel_ssd1306_config_t config,
+                 int width,
+                 int height) :
+    IPanelDevice(i2c,
+                 PIN_RST,
+                 (esp_lcd_panel_io_i2c_config_t) {
+                     .dev_addr = I2C_HW_ADDR,
+                     .control_phase_bytes = 1,
+                     .dc_bit_offset = 6,
+                     .lcd_cmd_bits = LCD_CMD_BITS,
+                     .lcd_param_bits = LCD_CMD_BITS,
+                     .scl_speed_hz = LCD_PIXEL_CLOCK_HZ,
+                 }
+    ),
+    ssd1306_config_(config)
+{
+  this->width_ = width;
+  this->height_ = height;
+  this->reset_gpio_num_ = PIN_RST;
+  this->lv_buf_size_ = width_ * height_ / 8 + LVGL_PALETTE_SIZE;
+}
+
+void SSD1306::init_panel(esp_lcd_panel_dev_config_t &config,
+                         esp_lcd_panel_io_handle_t io,
+                         esp_lcd_panel_handle_t &panel)
+{
+  // Allocate SSD1306 panel handle.
+  config.vendor_config = &ssd1306_config_;
+  ESP_ERROR_CHECK(esp_lcd_new_panel_ssd1306(io, &config, &panel));
+}

esp/cpp/07_lcd-panel/main/ssd1306.h

@@ -0,0 +1,48 @@
+#ifndef SSD1306_H
+#define SSD1306_H
+
+#include <esp_lcd_panel_ssd1306.h>
+
+#include "panel_device.h"
+
+// According to SSD1306 datasheet
+// https://www.digikey.com/en/products/detail/winstar-display/WEA012864DWPP3N00003/20533255
+// Bit number used to represent command and parameter
+#define SCREEN_WIDTH           128  // OLED display width, in pixels.
+#define SCREEN_HEIGHT          64  // OLED display height, in pixels.
+#define LCD_H_RES              SCREEN_WIDTH
+#define LCD_V_RES              SCREEN_HEIGHT
+#define I2C_HW_ADDR            0x3C
+#define LCD_PIXEL_CLOCK_HZ     (400 * 1000)
+#define LCD_CMD_BITS           8
+#define LCD_PARAM_BITS         8
+
+#define PIN_RST                -1
+
+class SSD1306 : public IPanelDevice {
+public:
+  // Constructors allow overriding ssd1306 config.
+  explicit SSD1306(i2c_master_bus_handle_t i2c) :
+      SSD1306(i2c, {.height = SCREEN_HEIGHT}) { }
+
+  explicit SSD1306(i2c_master_bus_handle_t i2c,
+                   esp_lcd_panel_ssd1306_config_t config,
+                   int width = SCREEN_WIDTH,
+                   int height = SCREEN_HEIGHT);
+
+  virtual ~SSD1306() = default;
+
+  // The configuration structure specific to the SSD1306.
+  esp_lcd_panel_ssd1306_config_t ssd1306_config_;
+
+  // For LV_COLOR_FORMAT_I1 we need an extra buffer to hold the converted data.
+  static uint8_t oled_buffer_[LCD_H_RES * LCD_V_RES / 8];
+
+private:
+  void init_panel(esp_lcd_panel_dev_config_t &config,
+                  esp_lcd_panel_io_handle_t io,
+                  esp_lcd_panel_handle_t &panel) override;
+
+};
+
+#endif // SSD1306_H

esp/cpp/README.md

@@ -5,18 +5,17 @@ shaunrd0/klips/esp/
 ├── 01_led-button               # Simple LED circuit controlled by an on board button.
 ├── 02_led-button-web           # LED controlled by a button or within a web browser.
 ├── 03_temp-humidity-web        # Temperature and humidity sensor within a web browser.
+├── 04_esp-idf-arduino          # CMake example instead of Arduino IDE for ESP development.
+├── 05_temp-humidity-web        # Temperature and humidity sensor within a web browser.
+├── 06_i2c-scanner              # Simple I2C device scanner.
 ├── ESP32-basic-starter-kit.pdf # PDF for tutorials in ESP32 starter kit.
 ├── ESP32-dev-module.png
 └── README.md
 ```
 
-This directory contains ESP32 projects largely adapted from the examples in [ESP32-basic-starter-kit.pdf](./ESP32-basic-starter-kit.pdf).
+Examples 1-3 are built using the Arduino IDE.
 
-The APIs in the original examples paired with this PDF have changed, and I decided to do some different things with the code and/or circuits, but the original code can be [found here](https://www.dropbox.com/scl/fo/6znlij3eb23ih4jxcpv2w/AKvB1t9CCUgoVRVtGen8Yrw?rlkey=z84anl0hs940qf9fpl7l8q8q2&e=1&dl=0).
-
-The board selected in [Arduino IDE](https://www.arduino.cc/en/software) is ESP32 Dev Module -
-
-![ESP32 Dev Module](./ESP32-dev-module.png)
+All examples after `04_esp-idf-arduino` are built with cmake and the [ESP-IDF](https://github.com/espressif/esp-idf).
 
 [Arduino ESP32 GitHub](https://github.com/espressif/arduino-esp32) \
-[Arduino ESP32 API reference](https://docs.espressif.com/projects/arduino-esp32/en/latest/libraries.html)
+[Arduino ESP32 API reference](https://docs.espressif.com/projects/arduino-esp32/en/latest/libraries.html)